Application Support: 
 Kvaser CanKing 
 Software platform: 
 Windows 2000/XP/Server 2003 
 Windows 95/98/ME 
 Windows NT4 
 Windows 3.x 
 DOS 
 PCcan product line has three models: PCcan 4xHS, PCcan HS / HS and PCcan HS. 
 Hardware: 
 ? The board is a quarter-size (length 135 mm) 8-bit ISA bus board and accounted 64byte the I / O space. The base address can be any 200 H, 240 H, 300 H and 340 H. The CAN controller interrupt signal can be connected - under software control - to the ISA bus IRQ 2 / 9, IRQ 3, IRQ 5, and any other. 
 ? the original 16 MHz oscillator can be used as a frequency range of 1-24 MHz oscillator replacement to obtain the required bit rate on the bus. PCcan 4xHS board consumes about 600 mA at 5V. 
 ? In PCcan card industry standard CAN controllers are easily programmed to accept. This makes the card ideal for cross-platform development: you can develop on your PC, your software, then move it, you need small changes to your embedded system. 
 ? CAN controller supports CAN2.0 A and 2.0 B (active). The driver supports the standard CAN bus, tell the ISO11898 physical layer. 
 External connectors: 
 ? The output from the CAN circuit optocoupler and bus driver (Philips 82C251, in line with ISO 11898) is connected to the female D-SUB connector. 
 ? The connector provides voltage to the bus section (optocoupler drive circuit). Alternatively, you can use the PC as a power source; but in the computer and there is no electrical isolation between the CAN bus. 
 ? In PCcan 4xHS, you can put 4 CAN I / O is connected to a common CAN bus, it can also be connected to the CAN connector. 
 Software: 
 The following software can be used to Kvaser PCcan Series: 
 ? Driver: library for DOS; 16-bit DLL for Windows 3.1; 32-bit support for Windows 95/98/ME/2000/XP and NT 4.0. 
 ? Kvaser CanKing version of Windows, a general-purpose interactive CAN bus monitor / analyzer, with specialized support CanKingdom and DeviceNet. 
 ? Kvaser CANLIB SDK, which contains the software you develop Kvaser CAN boards need everything. Contains all the documentation and many sample programs written in C, C + +, Delphi, Visual Basic and C #. All Kvaser CAN interface boards share a common software API. Written for one board type program will run without modifications on the other board types! 
 ? documentation, software and drivers are free. Upgrade the software on a regular basis on our website. 
 ? All of our CAN interfaces share a common 32-bit API, you can use the same procedure, without modification, for all our CAN interface! 
 Product Version: 
 ? Kvaser PCcan 4xHS (Item No. 00049-0) 
 4 CAN channel interface for ISA bus with 2 x SJA1000 and 2 x 82527 CAN controller. Built-in loop and terminal devices. A 25 - pin D-SUB connector. 
 ? Kvaser PCcan HS / HS (Item No. 00051-3) 
 2 CAN channel interface for the ISA bus with 2 x SJA1000 controller. Two 9 - pin D-SUB connector. 
 ? Kvaser PCcan HS (Item No. 00050-6) 
 1 CAN channel interface for ISA bus with 1 x SJA1000 controller. A 9 - pin D-SUB connector. 
 CAN controller connector channels 
 PCcan 4xHS 4 2 x SJA1000 
 2 x 82527 1 x D-SUB 25 
 PCcan HS / HS 2 2 x SJA1000 2 x D-SUB 9 

 Name: Chi Wei Electronics Co., Ltd., Guangzhou (www.triv.cn) 
 Tel :020 -38,744,186; 020-38744187 
 Fax :020 -38,744,189 
 Postal Code: 510640 
 Address: Wushan, Tianhe District, Guangzhou, South China University of Technology National Science and Technology Park, Building 2, Room 205-206 
 Contact: Liu implement Tel: 15999975195